ENW-20 cutter car washing system

SKU: EL83103005

Category: Washing systems for large boxes and cutter wagons

Price on request

Description
Others (1)

'[vc_row][vc_column width="1/2"][vc_column_text]

ENW-20 cutter trolley washing system

Capacity of 20 standard trolleys per hour.
Dimensions of the standard trolleys according to DIN9797:
200L - 790 x 675 x 700 mm (LxWxH)
300L - 790 x 675 x 950 mm (LxWxH)

Description

The entire system is constructed in a compact design from solid plates and profiles (stainless steel 304 - material number 1.4301.) and stands on adjustable feet. The washing cabin is quick and easy to clean. The spacious door makes the inside easily accessible for cleaning. The water tank has a sloping bottom so that the water can drain quickly when emptied. The rinsing frames are fitted with stainless steel nozzles. The pump, drive for the spray frames and the optional dosing pump are installed in a locked room at the rear of the system. This room is easily accessible via wide-opening doors. The standard trolley is easy to place on the loading door. After pressing the start button, the standard trolley is transported into the cabin and the door closes. The washing program now starts. During the main wash, the outside and inside of the standard trolley are cleaned by a rotating spray frame. A dosing pump can be installed optionally. Depending on the level of dirt, the duration of the washing program can be set (up to a maximum of 30 minutes). After the main wash, the standard trolley is rinsed with fresh water during the final rinse and any cleaning agent adhering to it is removed. (Hot final rinse water must be provided on site.) After the washing program is completed, the loading door opens and the standard trolley can be removed. Before the rinsing water flows back into the water tank for reuse, it is filtered. This filter is located in the middle of the system.